Safeguard yourself and the people you love from mobile phone radiation!
You can now experience the peace of mind with Cellsafe's scientifically proven mobile phone radiation reducing technology in a whole new way. The CellSafe Radi-Chip was developed and designed in Australia by a radio frequency communication engineer and is ground breaking technology. The CellSafe Radi-Chips are independently tested for their effectiveness in minimising radiation exposure by up to 99%* with virtually no impact on the transmission signal. This wafer thin (0.35mm) adhesive Radi-chip includes layers of microwave-absorbing materials and a radio frequency coupler which work together to direct radiation away from your face and body. Simply stick it on to the back of your device and replace your cover without even knowing it’s there. The CellSafe Radi-Chip models are independently tested by the NATA accredited EMC Technologies laboratories in Melbourne with a proven reduction in radiation of up to 95%*.
Each particular model reduces radiation exposure (SAR) by up to 99%*
- Micro 0.35mm thickness
- Fits under most cases
- Virtually no impact on phone or data signals
- Easy to apply
- Australian developed and designed
- Independently tested by an accredited laboratory
- Only scientifically proven product on the market of this kind.
(* refer to test results page for individual results according to phone make & frequency band)
SIMPLE TO USE!
Choose the right Smartchip for your phone and simply peel and stick to the back of your device. Most popular mobile phones catered for.
HOW IT WORKS:
The Radi-Chip Technology for Smart Phones: The Cellsafe(r) Radi Chip(tm) patent pending technology has been developed by an Australian RF Engineer. Radi-Chips consist of multiple layers of specially formulated microwave absorbing materials, combined with a specially engineered passive directional RF coupler . These layers absorb most of the transmitted RF signal from the mobile phones antenna while the RF coupler controls and disperses the signal towards the back of the phone. Devices which claim to act as ‘shields’ may significantly interfere with the normal operation of the phone. Reduced or redirected transmission levels caused by such shielding products can interfere with call reception and quality and may also cause calls to drop out. The Radi Chip technology has been scientifically tested and proven not to interfere with the transmission signal or with call reception, unlike these ‘shielding’ devices.
These layers are sprayed in a form of micro sized particles which is done by specially designed equipment. The composition is adjusted perfectly to absorb the maximum and equal signal power for the range of transmitted frequency bands from the phones antenna/s. These layers and our specially designed passive RF coupler, act as a one way gate to disperse the majority of the signal absorbed towards the back of the phone.
All of this is designed to achieve a better result than just keeping the phone away from users head or body (as recommended by the manufacturers). The Cellsafe(r) technology reduces SAR (Specific Absorption Rate) up to 99% * and will not interfere with transmission signal or reception. Now you can experience the peace of mind of Cellsafe(r)’s scientifically proven mobile phone radiation reducing technology in a whole new way. Enjoy the freedom to choose your own mobile phone case. This discreet chip is placed on the back of your phone and at just 0.35mm is thin enough to allow fitting of any mobile phone case over the top. The Radi Chip(tm) can also be used on your mobile phone without a case. (* refer to test results page for individual results according to phone make & frequency band).
How To Install Your Radi-Chip