Earthing Queen Fitted Sheet Kt
Sleep Grounded & Feel The Difference!
Our fitted Earthing Sheets are made with 100% cotton woven with a soft conductive silver thread that allow you to sleep grounded every night., effortlessly. They are soft, comfortable and a delight to sleep.
Sleeping grounded is the best way to reap the benefits of connecting with the Earth effortlessly! Sleeping grounded has been shown to promote a deeper, more refreshing sleep as well as reducing inflammation which may lead to better overall wellness.
The Earthing Queen Fitted Sheet is made from 100% cotton with soft silver fibres woven throughout. The sheet has been designed to replace your standard bottom fitted sheet so that your entire bed surface is grounded, no matter where you are laying.
The sheet is lightweight and comfortable and as with all our Earthing products the sheet needs to connect back to the earth with our specialised grounding cord and plug. Alternatively you can use a optional ground rod to connect back to the earth - click here to see. The sheet needs to be washed with warm water in a washing machine on a regular basis.
Due to the growing popularity of these products, there are now imitations and counterfeits appearing on the market. Everything here is a genuine Earthing™ or Groundology™ product. Please be aware that official distributors are not permitted to sell on marketplaces such as Amazon and eBay, and so products sold there are not likely to be genuine.
Queen Fitted Sheet Kit Includes:
- Queen Fitted Sheet
- 4.6m Straight Cord
- Australian Adapter plug with built in splitter
- Instruction brochure
PLEASE NOTE: THIS IS THE USA VIDEO AND YOU WILL NEED OUR INCLUDED AUSTRALIAN ADAPTER PLUG TO GO INTO THE POWER POINT FIRST.
Step 1: Check Your Outlets Are Earthed with our Socket Tester:
In order to use your Earthing products through an electrical outlet, you must connect it to the “earth port” of an earthed 3 prong outlet. Before plugging in your Earthing product, check that the outlet is earthed by plugging in the Socket Tester. Three orange lights illuminated is GOOD and means that you have a proper earth and you are ready to connect your Earthing product. Any other light combination means your outlet is NOT properly earthed. Try testing another outlet. If it still doesn’t work, then you will need to use a grounding rod in the optional step 2 below.
Please Note: In Australia it is compulsory by law to have all electrical power outlets Earthed, however, if in doubt for any reason it is easy to check with our socket tester which are inclusive in all our Starter Packs, otherwise you can purchase individually – please click here to order.
Step 2: (Optional) Using The Ground Rod When Outlets Aren't Earthed:
a. First Push the Ground Rod directly into the earth around 20cm to 25cm, close to the foundation of the building and where vegetation is growing or the area is damp.
b. Run the cord from the Ground Rod, under or around a window or door, near where you will be using your product.
c. Make sure to cover the cord to prevent tripping.
d. Plug the prong end of your cord into the receptacle end of the Ground Rod cord. If you live in a dry area, such as a desert, soak the earth around the Ground Rod from time to time for maximum conductivity.
Step 3: Setting Up The Fitted Sheet:
a. Place the Earthing sheet over your mattress and stretch each corner gently to fit contour of the mattress, as you would any fitted bottom sheet.
b. Insert one end of the Earthing cord into the grey adapter plug supplied, then into a properly earthed wall outlet or if using a Ground Rod, connect to cord of an Earthing ground rod placed in the Earth outside.
c. Find the connecting black tab on the sheet and snap other end of Earthing cord onto the tab.
d. When you lie down on the connected sheet, any bare skin contact will transfer the Earth’s energy to your body once you connect the sheet.
Step 4: How To Test For Conductivity With The Product Continuity Tester:
The purpose of the tester is to verify that your Earthing sheet is conductive
a. Firstly verify that the Product Tester itself is operational by pressing button that says “press” and release—the small light on front will flash green one time then goes off. Indicates tester is good. If no green light battery (Lithium CR2032) may be flat or unit faulty.
b. Snap Coil Cord included onto Product Tester’s metal press stud, if not already assembled.
c. Insert your grey Earthing Adapter Plug into the power outlet you intend to use with your product.
d. Insert prong end of Product Tester Cord into one receptacle of the adapter plug or if using a Ground Rod, attach a splitter to end of ground rod cord and insert into one of the receptacles.
e. Plug Earthing cord from sheet into the other receptacle. You should now have both the Earthing sheet and Tester connected to the plug that is in a power outlet.
f. Place product tester flat on the sheet. The round metal plate must be in contact with surface of the sheet. Press firmly on the sheet to obtain a good contact and press down on the "Press" button. A green light means that sheet is in working order. In unlikely case that no green light comes on, the sheet may be defective or has lost conductivity and should be replaced – you should also check your connecting cords to make sure they are conductive as well (see below).
Sometimes, people have difficulty testing their sheets. If the light doesn’t come on, place one hand on the sheet while holding the tester in the other hand and with one finger on the silver button on back of tester. A green light would show that the body is grounded when touching the sheet. Make sure that both the tester and the sheet are plugged in to the earth, as described above. The reason for perhaps the light not going on: you aren't pressing hard enough on the tester. The surface fabric of the sheet sometimes prevents the button from contacting the conductive silver fibres of the sheet. The surface seems smooth, but if you were to look at it with a microscope you would see "hills and valleys." The pliant surface of the skin, unlike the hard metal button, will bend around fibres and make good contact. You can also put some moisture on your finger tips to create a better contact.
g. Disconnect product tester from the adapter plug or ground rod. However, it is fine to leave plugged in to test when needed later on
h. You don’t have to test your sheet often. Perhaps after cleaning. The more you use the tester, the sooner the batteries in the tester will expire, replace battery (Lithium CR2032) by unscrewing the back panel.
Test Your Product Cords For Conductivity:
- Replace the coil cord already on the product tester with the cord to be tested.
- Touch the metal pin of the testing cord to the back of the metal disk on the tester
- Hold down and press the “Press” button for at least 3 seconds.
- A green light indicates that the cord is in good working order.
Step 5: How To Wash and Care For Your Earthing Sheet
It is good to wash your Earthing sheet. It will not be harmed by washing, in fact it is beneficial. Washing in warm water strips body sweat and natural skin oils from the silver keeping it conductive.
- Wash a minimum of 2x per month or weekly
- Wash in a washing machine, with a mild detergent such as Earth Choice “standard”
- Wash with warm water, approximately 40-60 degrees Celsius (105 Fahrenheit)
- Dry in a dryer on low or line dry
- Iron on low heat – only if needed
- Don’t wash with bleach or fabric softeners
- Don’t use whitening detergents (including lemons), oxi-detergents OR detergents with oils like lavender, coconut oil or eucalyptus oil.
- Don’t use dryer sheet fabric softeners or wool washes
- Don't apply lotions, medical creams or body oils before bed.
Bleach, body lotions and oils can tarnish the silver thread rendering it non-conductive. Fabric softener builds up on the silver and also ruins its conductive properties. Whiteners and bleaches will ruin the silver quickly and render them non-conductive.
It is advised to wait one hour to use the product after applying lotion to the skin and to make sure the lotions have been absorbed by the skin
1 Queen Sheet 60 x 80 inches (153 x 203 cm)
16" (40.5) pocket depth
Queen Sheet has 656 metres of silver thread
|Unit Of Measure||ea|
Stopped Snoring After Just One NightBy: Peter on 7 June 2017My brother spent a week with me and I grounded him the first night, he was so amazed. I kept talking about it but it was not until he tried it that he became interested. The amazing thing is he is a loud snorer, like just dosing in the chair loud as. Did not snore once after grounding just phenomenal. Please add him to your email list his name is ...........
A bit disappointedBy: Hazel on 15 October 2016I so badly wanted for this to work, but I can't honestly say that I have noticed any difference. Oh well, at least it can still serve as a bottom sheet, I guess.
Thank you for your comments Hazel and we are sorry you didn't get instant results, however, each person has different experiences due to their individual circumstances. Clint Ober recommends to stick with it as some people have shown to take up to 3 months to notice any improvements and you have only been using your sheet for one month. Also we recommend that you keep a journal as some changes can start off slow and subtle and may just be perceived as the new "normal", its not till you can go back and see how far things have changed after 3 to 6 months. Also you will need to check that the power point you are using is Earthed correctly with an Socket Tester and the sheet and cord are connected correctly and conductive with an Product Tester. See Testing Equipment on our website. http://www.barefoothealing.com.au/c/testing-equipment/107 Regards Linda
Numbness In Feet And Hands Disappearing!By: Philip on 2 July 2016Hello Barefoot Healing, Just wanted to let you know I believe I have significant benefit from sleeping on the earthing Sheet. I had lots of “pins and needles’ and numbness through my hands, arms, legs feet and spreading through my body – which is disappearing. Also I had 2 Morton's Neuromas in my feet(that I had cortisol for to go to base camp and they have almost disappeared. I do take lots of magnesium (Endura) but I believe its your sheet that’s doing the magic. [A neuroma is a thickening of nerve tissue that may develop in various parts of the body. The most common neuroma in the foot is a Morton's neuroma, which occurs between the third and fourth toes.]
Best Sheet EVERRRrrrrBy: Jarrad on 5 May 2016The fitted earthing sheets are FANTASTIC. I used the half sheet for years but compared with that this is providing us with the best sleep we have had... EVER... If possible, you should look into working on a range of different thread count sheets. We chose to get the fitted sheet only as we love our 1000 thread count top sheet and the earthing doesn't conduct properly through the 1000 count fitted sheet over the earthing sheet ( I Tried ), though it does through the thinner cotton sheets, as stated.. In any case, thats a small thing when considering the sleep improvements from sleeping grounded. Love your products, keep up the good work.
Earthing sheetBy: John on 28 February 2016We just love our earthing sheet. Absolutely brilliant. We've had plenty of time to check it out. We have been so impressed that we have bought sheets for our adult kids - all married and all love their sheets too. And we have recommended others to try these and they have purchased these sheets also and speak highly of them. Earthing was a whole new concept for us - and it certainly works. Thanks for your great service and products. Keep up the good work, regards, John